Two new SENOFLEX® WB OPAQUE WHITES from WEILBURGER Graphics GmbH

Admin's picture

Submitted by Admin on Thu, 2018-11-15 14:22.

Press release – for immediate publication

 

 

Two new SENOFLEX® WB OPAQUE WHITES from WEILBURGER Graphics GmbH

 

Gerhardshofen, 15 November 2018 - WEILBURGER Graphics GmbH, based in Gerhardshofen, Franconia, has now developed two new opaque white products to provide its offset and flexo printing customers with solutions for the ongoing trend towards low-cost and recycled substrates with non-white surfaces.

 

SENOFLEX® WB OPAQUE WHITE 395800 is an opaque white specially formulated for application via a coating unit in offset printing. Depending on the press configuration, this opaque white can be applied inline in an upstream coating unit or offline via a first press run prior to actual printing. This opaque white has been developed to meet the highest demands and offers excellent opacity and a brilliant white even with a single pass. The degree of whiteness can be controlled by the amount of ink to be applied, depending on the requirements of the design and the substrate used. The increasingly used uncoated, single-coated and open-pored substrates become very good and dot-sharp overprintable due to the flat application of the opaque white.

The 14. Franconian Lacquer Specialties of WEILBURGER Graphics GmbH

Admin's picture

Submitted by Admin on Thu, 2018-11-15 11:07.

Press release – for immediate publication

 

The 14. Franconian Lacquer Specialties of WEILBURGER Graphics GmbH

 

Gerhardshofen, November 14th 2018 – The coating, adhesive and flexo ink specialist for the graphic industry, WEILBURGER Graphics GmbH, based in Gerhardshofen Franconia, invited again this year to the annually organized Franconian Lacquer Specialties. Also this year the event was a great success again. More than sixty invited guests accepted the invitation on October 25th and were treated to the latest trends and developments in the packaging industry in a relaxed atmosphere by top-class guest speakers and company employees.

New Coating Quantity Calculator from WEILBURGER Graphics GmbH

Admin's picture

Submitted by Admin on Mon, 2018-09-10 15:49.

Press release – for immediate publication

 

New Coating Quantity Calculator from WEILBURGER Graphics GmbH

 

Gerhardshofen, September 10, 2018 - WEILBURGER Graphics GmbH, a globally renowned manufacturer of coatings, water based flexo inks and adhesives based in Gerhardshofen, Franconia, has now put a new coating quantity calculator online.

 

The coating quantity calculator enables the company's customers to calculate the coating quantities required for print jobs quickly and easily using given print job parameters. In addition to the sheet format, the area coverage for coating and the running length, including make ready and expected waste sheets, the anilox rollers used are also considered. The most common anilox rollers with GTT, Hexagonal, Hashur and ART gravures were taken into account. The coating quantity calculator also offers the option of calculating the required coating quantities for straight and perfecting jobs, if these are to be produced with the same coating and the same anilox roller, in just one calculation run. With different coatings and/or anilox rollers for perfecting, the user can also easily calculate these quantities by means of a second calculation run - without having to re-enter all parameters. Only the additional amount of coating required for filling and circulation per print run must be added by the calculator's user, as this varies depending on the system and the peripherals used - such as coating temperature control, for example. However, WEILBURGER Graphics expressly points this out in the coating quantity calculator and also provides users with reference values for different sheet formats.

New low-migration blister coating from WEILBURGER Graphics GmbH

Admin's picture

Submitted by Admin on Mon, 2018-04-16 11:01.

Press release – for immediate publication

 

New low-migration blister coating from WEILBURGER Graphics GmbH

 

Gerhardshofen, April 16th 2018 – The company has developed a new coating formulation for blister coatings with optimized processing parameters in close collaboration with its customers. The resulting low migration coating is now available under the product identifier SENOLITH® WB BLISTER COATING FP NDC 359503.

 

Due to the new formulation, this coating can be processed at activation temperatures of 145 °C at high cycle rates in the blister process.

 

Further advantages of the SENOLITH® WB BLISTER COATING FP NDC 359503 are:

WEILBURGER Graphics launches new, low-migration UV lacquer line

Admin's picture

Submitted by Admin on Thu, 2018-03-15 14:52.

Press release – for immediate publication

 

WEILBURGER Graphics launches new, low-migration UV lacquer line

 

Gerhardshofen, March 15th 2018 – WEILBURGER Graphics GmbH, based in Gerhardshofen, Franconia, has been succeeded a breakthrough in the production of low-migration UV lacquers. The company is now launching an UV lacquer, which is no longer based on “classical photoinitiator”, under the new product class SENOLITH® UV FP PLUS. The UV lacquer technology used for the first time in this new product eliminates the need for low-molecular photoinitiators, e.g. benzophenone or 4-methylbenzphenon, which minimize the migration of fission products. The use of low-molecular compounds < 1000 Dalton is omitted here. The UV irradiation initiates a self-crosslinking process which results in to a high crosslinking density of the polymer matrix.

WEILBURGER Graphics launches new film laminating adhesive

Admin's picture

Submitted by Admin on Fri, 2018-02-16 17:40.

Press release – for immediate publication

 

WEILBURGER Graphics launches new film laminating adhesive

 

Gerhardshofen, February 16th 2018 – WEILBURGER Graphics GmbH, based in Gerhardshofen, Franconia, has developed a new, self-cross-linking film laminating adhesive for use in the indirect food packaging. In contrast to the previous two-component adhesives, this new generation of self-cross-linking film laminating adhesive guaranteed initial and final adhesive even without the addition of hardener. The adhesive is embossing-proof and creasing able and can be optionally processed for the application with special films. Another advantage of the new SENOBOND® WB FILM LAMINATING ADHESIVE FP NDC 375224 is the common chemical basis of the new adhesive with the already established SENOBOND® WB FILM LAMINATING ADHESIVE 375207. Thus, the expensive wash cycle can be omitted when converting the adhesive plant to packaging which are not suitable for food packaging which again saves time and money.

The 3rd Worldwide Partners Meeting of WEILBURGER Graphics GmbH

Admin's picture

Submitted by Admin on Sun, 2017-11-19 15:12.

Press release – for immediate publication

 

The 3rd Worldwide Partners Meeting of WEILBURGER Graphics GmbH

 

Gerhardshofen, November 17th 2017 – From November 6th – 7th, WEILBURGER Graphics GmbH, based in Gerhardshofen, Franconia, has now hosted its Worldwide Partners Meeting for the third time which takes place every two years. All of the company’s worldwide sales partners will be invited to a joint networking event to introduce new products from the globally operating specialist for varnishes, inks and adhesives for the printing industry and to exchange information on trends in the printing industry as well as the direct contact and to support the exchange of all sales partners. Also, this year the event was very well attended and only very few sales partners were unable to attend due to scheduling or political reasons.

Successful fourth SENOFLEX®-Workshop of WEILBURGER Graphics GmbH

Admin's picture

Submitted by Admin on Mon, 2017-10-09 13:53.

Press release – for immediate publication

 

Successful fourth SENOFLEX®-Workshop of WEILBURGER Graphics GmbH

 

Gerhardshofen, October 9th 2017 – This year, the fourth SENOFLEX®-Workshop of WEILBURGER Graphics GmbH, based in Gerhardshofen, Franconia, was again a great success. Almost forty participants attended the event from September 21st until 22nd and were able to discuss the latest trends, products and solutions in the range of the increasingly strong flexo printing. Also, this year the company invited top-class guest lecturer in addition to their own lectures. A main theme of the event was finished and high-valued packaging. Trends from the online trading were highlighted, solutions and feasibility scenarios were demonstrated as well as possibilities for their qualitative implementation. Together with the production partner Flint, Göpfert, Metsä Board, PANFLEX and THIMM a high-valued dispatch packaging was particular produced for the workshop in double-sided flexo post print with overall five inks and two coatings as well as a high finished corrugated board poster in black and gold with gloss coating and a haptic SENOSOFT® WB matt coating. The latter was printed at Göpfert live on a Göpfert – Caseline Model CL 11/25 – P Evolution Flowbelt Technology with direct-drive technology and vacuum transport on the second day of the event.

Follow-up from WEILBURGER Graphics at interpack and IST UV-Days

Admin's picture

Submitted by Admin on Sun, 2017-06-25 23:49.

Press release – for immediate publication

 

Follow-up from WEILBURGER Graphics at interpack and IST UV-Days

 

Gerhardshofen, June 25th 2017 – WEILBURGER Graphics GmbH, based in Gerhardshofen, Franconia, can look back successfully on two trade fairs as exhibitor. The company exhibit together with the PrintCity at interpack in Düsseldorf in hall 11 booth B04 from May 4th until 10th and at the UV-Days of IST METZ GmbH in Nürtingen from May 15th until 18th.

 

While the company presented its full range of most significant varnishes, flexo colours and adhesives at interpack, the main focus at UV-Days was on the latest products of the SENOLITH® UV and SENOLIT® UV LED series. The varnish specialist also showed on the basis of filigree elaborated varnish effect samples which is possible today in the field of high gloss finishing with perfect interaction of design and most significant varnish systems.

WEILBURGER Graphics at the international CFTA conference

Admin's picture

Submitted by Admin on Wed, 2017-06-21 19:54.

Press release – for immediate publication

 

WEILBURGER Graphics at the international CFTA conference

 

Gerhardshofen, June 21st 2017 – WEILBURGER Graphics GmbH, based in Gerhardshofen, Franconia, successfully participated at the international CFTA conference which took place in the Zámeček hotel in Mikulov, Czech Republic from April 26th until 27th. The CFTA is the Czech daughter federation of the European FTA, the European umbrella organization of the flexo industry. The FTA Europe represent the common interest of the European flexo industry and also provides a joint platform for the European flexo associations to encourage European exchanges, cooperation and general orientation of the regional offshoots. As a longstanding member of the German DFTA, WEILBURGER Graphics was invited by the Czech CFTA to present their high-quality inks and varnishes of the SENOFLEX® product classes.